客服QQ:

675609587

邮箱地址:

675609587@qq.com

电话:13280489678

手机:13280489678

> 新闻中心 > 行业动态 >

摇臂钻床购买收货注意事项

2020-07-15 22:34来源:未知浏览:


1、摇臂钻床表面无掉漆,碰、拉、损伤,紧固螺钉的有无松懈。
2、摇臂钻床操纵手柄、控制按钮是否齐全,商标印刷或刻印清楚。
3、润滑、冷却系统的管路、注油器、固定夹、截止阀等装置齐全。
4、保护限位开关、安全挡铁、防护罩盖等齐全系统完善可靠。
5、摇臂钻床性能、工效保持原设计能力或满足工艺要求。
6、传动系统变速齐全、运行正常无噪音、摇臂升降灵活。
7、摇臂钻床操作纵构构灵活、准确、定位可靠稳定。
8、摇臂钻床电气、液压系统运行正常,性能良好。
9、随机说明书、合格证等资料齐全。
10、摇臂钻床附件、专用工具等是否齐全。

 

 

1. The surface of radial drilling machine shall be free from paint dropping, collision, pulling and damage, and whether the fastening screws are loose.

2. Whether the control handle and control button of radial drilling machine are complete and the trademark is printed or engraved clearly.

3. The pipeline, oiler, fixing clamp and stop valve of lubrication and cooling system are complete.

4. The protection limit switch, safety guard iron and protective cover are complete, and the system is perfect and reliable.

5. The performance and work efficiency of radial drilling machine keep the original design capacity or meet the process requirements.

6. The transmission system has complete speed change, normal operation, no noise and flexible lifting of rocker arm.

7. The longitudinal structure of radial drilling machine is flexible, accurate, reliable and stable in positioning.

8. The electrical and hydraulic system of radial drilling machine runs normally and has good performance.

9. The attached instructions and certificates are complete.

10. Whether the accessories and special tools of radial drilling machine are complete.

  • 电话:13280489678
  • 联系人:郑经理
  • 邮箱:675609587@qq.com
  • 地址:山东省滕州市经济开发区
  • 山东沈北数控产品有机械摇臂钻床、液压摇臂钻床、立式钻床、数控钻床、铣床、锯床、液压机等型号机床设备及配件。厂家直接发货质量保证,价格优惠,发货周期短,产品畅销国内及国际市场,得到了越来越多的国内外客户的认可和支持。

微信二维码

Copyright © 山东沈北数控机床有限公司 版权所有 备案号:鲁ICP备20014639号-3