客服QQ:

675609587

邮箱地址:

675609587@qq.com

电话:13280489678

手机:13280489678

> 新闻中心 > 行业动态 >

摇臂钻床应用PLC电气控制系统优点突出

2020-07-15 22:44来源:未知浏览:

摇臂钻床应用PLC电气控制系统优点突出

摇臂钻床是孔加工机床。能够进行多种形式的机械加工,如钻孔、扩孔、铰孔、攻丝及修刮端面。主轴攻丝自动反转加上微动进给,最适合盲孔和定深孔。故此摇臂钻床在车间生产、机械制造、建筑加工等多行业最为常见。

目前,我国的钻床所采用的是传统的继电器一接触器电气控制系统。因为摇臂钻床的运动部件比较多,必须由多台电动机进行拖动,电路复杂,触点多、导致故障率高、可靠性差,在工厂生产流程中当中电气故障经常发生,影响生产。

所以对传统继电器一接触器的电气控制系统改造是很要必要的。可编程逻辑控制器(PLC),利用PLC控制进行改造,可以使电路线路简化,响应加快精确度更加高,可靠性提高,方便维护、检修机器,同时能有效地减少成本,符合经济效益=总的来说,PLC电气控制系统优点突出,本次对钻床的电气控制系统进行PLC改造,可以大幅度提高钻床的工系统的工作稳定性、工作性能,为我国生产加工现代化翻开新的篇章。

 

 

 

Application of PLC electric control system in radial drilling machine has outstanding advantages

Radial drilling machine is a hole processing machine. It can carry out various kinds of machining, such as drilling, reaming, reaming, tapping and scraping the end face. Spindle tapping automatic reversal plus micro feed is the most suitable for blind hole and fixed depth hole. Therefore, radial drilling machine in the workshop production, machinery manufacturing, construction processing and other industries are the most common.

At present, the traditional relay contactor electrical control system is used in drilling machine in our country. Because there are many moving parts in the radial drilling machine, it must be driven by multiple motors. The circuit is complex and the contact points are many, which leads to high failure rate and poor reliability. In the production process of the factory, electrical faults often occur, affecting the production.

Therefore, it is necessary to reform the traditional relay contactor electrical control system. Programmable logic controller (PLC), the use of PLC control for transformation, can simplify the circuit line, speed up response, higher accuracy, improve reliability, convenient maintenance and repair of the machine, at the same time can effectively reduce the cost, in line with economic benefits = in general, the advantages of PLC electrical control system are outstanding, this PLC transformation of the electrical control system of drilling machine, can be greatly Improve the working stability and performance of the drilling machine system, and open a new chapter for the modernization of production and processing in China.

  • 电话:13280489678
  • 联系人:郑经理
  • 邮箱:675609587@qq.com
  • 地址:山东省滕州市经济开发区
  • 山东沈北数控产品有机械摇臂钻床、液压摇臂钻床、立式钻床、数控钻床、铣床、锯床、液压机等型号机床设备及配件。厂家直接发货质量保证,价格优惠,发货周期短,产品畅销国内及国际市场,得到了越来越多的国内外客户的认可和支持。

微信二维码

Copyright © 山东沈北数控机床有限公司 版权所有 备案号:鲁ICP备20014639号-3